General specifications are:
12 channel receiver :
Radio frequency: 315MHz
Operating Voltage : 12VDC
Decode: Learning Code
Operating Type : Momentary/Toggle/Latch selectable
Relay : 10A 120VAC, 20A/14VDC
Size : 98mm x 80mm x 27mm
12 channel Transmitter :
Radio frequency : 315 MHz
Operating Voltage : 23A 12VDC Battery
Decode : Fixed code, Soldering
Transmitting Distance : 800m
Mode:
Momentary: Press->ON, Release->OFF
Toggle: Press->ON, Press again->OFF
Latch: Press->ON, Press other->OFF
Kit Include:
1 x Transmitter
1 x Receiver
!B9zctlQ!Wk~$(KGrHqR,!k8Ey+jC)40SBM60s7vl3Q~~0_12.jpg
Now, there are a few problems:
operating voltage is 12V (I don´t have any of these systems, but somehow I have this feeling that it could work on less voltage)
battery that can be used for this is about 515gr(12v ni-mh 3800mAh), making tanks very heavy
reciever unit is big, and won´t fit smaller tanks
additional transmitter and batteries
But, you do get 12ch system to use for lights/extra sound units/extra movments etc.
So, what do you all think about this?
Is it worth looking at or is it just a step in wrong direction?Statistics: Posted by kamaz — Mon Jul 04, 2011 5:11 am
]]>