Statistics: Posted by Peregrine — Fri Jun 09, 2017 2:53 pm
]]>
Plus I have only now bought a new HL tank after X year to find that they too no longer have the springs on the lever - but stupid joystick assemblies. So the source of springs is also getting difficult.
To make your existing 9XR lever centering you will need this part 3D printed and some brass rod.
9xr_catch.stl
You will also need a 9XR lever - but one bridge at a time. If you can't print the part above then there is no point going ahead.
Cheers
KG
Statistics: Posted by Phyrephish — Tue Dec 20, 2016 7:12 am
]]>
Hmm, anybody have an idea? hobby king has no option for self centering sticks. and no spare parts...
Statistics: Posted by robtronic — Mon Dec 19, 2016 9:12 pm
]]>
The 9X lever does not work for the 9XR Pro
Regards
Kevin Grannum
Statistics: Posted by Phyrephish — Fri Dec 16, 2016 6:44 am
]]>
On my own radio i bought a complete lever unit from HK(no more selling now!) .
Now i must do it for a friend of mine, so i ordered the tiny little thing from your site
get your upgrade stuff today and now the question.
Is the instruction for the 9x the same way as for the 9xr pro???
Thnx for your help soon!!
Best regards from south germany!
PANZER Marsch!
Statistics: Posted by robtronic — Wed Dec 14, 2016 10:45 am
]]>
went to the er9x link you gave me. When l "right clicked" on the 9X link it did not give me the option to "save as" it just opened up a tone of code which filed my screen.
What have l done wrong?
Cheers mate
Dave
Statistics: Posted by spudman1977 — Tue Oct 25, 2016 8:12 am
]]>
thanks mate, will give it a go.
cheers brother
Dave
Statistics: Posted by spudman1977 — Tue Oct 25, 2016 7:38 am
]]>
If I did the radio you will need to open it up and access the 6 or 10 pin header that is inside.
It is inside as one does not know if the customer uses AA batteries or a LiPo. The header is connected to the main PCB by 6 cables - I'm sure you will find it.
On the old 9X you need a USBAVR programer like this
http://rctanksaustralia.com/shop/index. ... cts_id=181
I do not sell these anymore as I am not prepared to handle any computer related driver install questions. I do Tank control boards. You can get the programmer off eBay but then there is lots of fake crap on eBay.
http://www.ebay.com.au/sch/i.html?_from ... vr&_sop=15
Find out whether you have a 6 pin or 10 pin plug inside the 9X before ordering.
Once you have USB AVR the fun part is installing the drivers. When does you use eepe to upload any Asp model files for the 9X to your 9X. BUT FIRST I would also upgrade your version of er9x. DO NOT USE old versions of tankER9X - there is no need with new er9x
You can find eepe, er9x and manuals for such at www.er9x.com
Asp model files for 9X are on forum somewhere.
Alternately you can use eepe to openan Asp model file and look at the settings and transfer manually to radio.
Cheers
KG
Statistics: Posted by Phyrephish — Mon Oct 24, 2016 10:24 pm
]]>
I have a first gen Turnigy 9X with which l purchased of Kevin many years ago. It has the templates for all the mixes as programmed by Kevin. Was wondering if l can upload the ASP template onto it, and if so where do you plug the usb cable into the transmitter?
Thanks Kevin, as l think it will be you who posts a reply.
cheers guys
Dave
Statistics: Posted by spudman1977 — Mon Oct 24, 2016 4:28 pm
]]>
Statistics: Posted by ArchOlson — Tue Sep 27, 2016 4:02 am
]]>
Yes, those are the receivers to use.
Cheers
KG
Statistics: Posted by Phyrephish — Fri Sep 02, 2016 7:20 am
]]>
Yes it is not hard to get more than 8 channels with the 9XR Pro. However I would not use the OrangeRX system.
The best way to get more than 8 channels is to use the FRSky XJT module and the XR series of receivers. No modification is required just place the XJT module into the back of the Pro.
With the FrSky system you can then use a number of ways to get more channels.
1. Add on a second receiver for up to 16 Channels (2 x X8Rs)
or
2. Add on additional SBUS to PPM converters (each converter gives an additional 4 channels)
Cheers
Kevin G
Statistics: Posted by Phyrephish — Fri Sep 02, 2016 7:18 am
]]>
Wanna know , how I can get more than 8 channels on the 9xr pro? Saw a picture from a guy Who had a orangerx module in a 9x and have 12 channels?Hobby King told me dont Work with the 9xr pro ?is IT true????or must it be modded?
Best regards and hope to heAr you soon!!!! Robert
Statistics: Posted by robtronic — Fri Sep 02, 2016 5:36 am
]]>
Statistics: Posted by Richo65 — Fri Sep 02, 2016 12:22 am
]]>
]]>