Here is the newest version of the RC5HL board. This is a pic sent from the PCB assembly team for final approval.
RC2HL_V9_production.jpg
Note 1: C6 & C7 are missing - my fault - this will be fixed and hopefully it will not be more than another day delay.
Note 2: The basic layout of the board remains the same but there are a few new additions.
a) Added Power, Switch 1 and Switch 2 LEDS. The power LED will light if there is power supplied to the board while Sw1 and Sw2 will turn on whenever their respective switches are activated.
and
b) Added V+ and V0 pads to the Auxillary outs
Expected arrival is still 26 or 27 May
Cheers
KGStatistics: Posted by Phyrephish — Tue May 13, 2014 7:08 pm
]]>