OTHER IMPORTANT NOTE
MAKO2 will NOT offer anti-track recoil blocking with the new Heng Long 2.4 gHz control boards. This is because Heng Long have changed the timings on these boards such that the recoil is initiated BEFORE the IR signal is activated. As such there is no way now of receiving a '-' signal that the recoil is about to take place. Since MAKO is not good enough to look into the future if you purchase a 2.4 gHz Heng Long system then you will be stuck with the track recoil unless you also get a Komodo'+'.
For the technically inquisitive. Mako2 and earlier Dragon/Komodo use the '-' of the IR signal to trigger the recoil blocking process. The good old RX18 activated the IR signal BEFORE starting the track recoil and hence MAKO was able to immediately cut the motor supply and hence block the recoil. With the new 2.4gHz Heng Long MFUs the IR signal is now activated AFTER the recoil and hence the supply to the motors is cut AFTER the recoil takes place.
ALL OTHER IR BATTLE FEATURES OF MAKO2 still work 100% INCLUDING BLOCKING OF THE HIT SHUDDERS AND DEATH SPASM
Cheers
KGStatistics: Posted by Phyrephish — Sat Jan 31, 2015 8:11 am
]]>