Further, users can choose between Axis and Allied machine gun types. So there are in fact 4 different machine gun muzzle flash rates available.
Why is this so???
I have always wanted more customisation of the machine guns to allow for the differences in rate of fire between the MG42 and the American 30 & 50 cal machine guns. Consequently, Asp offers a pair of hi-rate of fire machine guns (MG42 type) and pair of slower rate of fire machine guns (Allied type).
ASP ships with the hi rate machine guns as a default setting. If installing ASP into an Allied tank and you wish to add the sounds of the 50 & 30 Cal guns and have the muzzle flash rates match then you can do the following:
To toggle between Hi Rate and Lo Rate Machine guns:
1. At startup when the headlights are flashing activate the MG1 switch
2. Start tank as you normally would with the ignition switch
3. When you hear the engine startup sound turn off the MG1 switch
This process will TOGGLE between hi and lo flash rates. This setting is kept in Eeprom so you do not need to repeat each time at startup. To change back to hi rate simple repeat the above process.
Video to follow soon....Statistics: Posted by Phyrephish — Sun Mar 15, 2015 4:23 pm
]]>