Yes - It is always best to start with the minimal of connections
If I was testing what you have - I would connect it all up outside of a tank
Connect just the power, receiver board, speaker and volume knob. Turn on the radio and then turn on the RX18. OK you won't see the flashing Headlight so assume it is on - Then start the tank with the radio
If everything is good then it will start up and you will hear the motor start sound via the speaker. If you can not get to this point then you will have to assume that either the Radio, RX18 or Receiver board is/are broke.
If you do get the startup sound then add another connection and try again. The motors are unlikely to cause a problem but it is possible if there is a problem on your hull wiring for the unit not to work when you connect the 8-pin connector.
Good luck
KGStatistics: Posted by Phyrephish — Wed Jun 17, 2015 8:23 am
]]>