|
|
RC Tanks Australia ForumRemote Controlled Tanks Australia
|
|
It is currently Sat May 25, 2024 11:30 pm All times are UTC + 10 hours
|
Page 1 of 1
|
[ 2 posts ] |
|
Author |
Message |
Tankbear
|
Post subject: 9XR Pro Programming Help Posted: Sat Nov 07, 2015 8:34 pm |
|
Joined: Mon Feb 13, 2012 7:44 am Posts: 177 Location: UK
|
Hi Guys,
I've a 9XR Pro with standard firmware which I'm using for a RC excavator, but I'm a bit stuck on something.
At the moment I have a brushless ESC connected to channel 5 which is assigned a rotatory knob, channels 6, 7, 8 have servos attached to the hydraulic valve block to control the pistons. channels 6,7, 8 are programmed on the thumb sticks.
So currently I turn the knob about 1/4 turn to get about 25% throttle on the pump ESC then I can play around with the thumb sticks to get the pistons moving.
But I want to try this setup.
When ever I move thumb sticks (channels 6,7, 8) the pump automatically start at 25%
I tried adding mixing to channel 5 but it doesn't work for when I move a stick left or down only right or up plus it appears to take the sum of all 3 sticks so can get 75% in some stick configurations.
I'm sure I'm missing the obvious but any suggestions welcome.
Ian.
_________________ HL/Asiatam Metal Tiger 1 HL/Asiatam Metal KV-1 (1941) WSM T-34 SU100 HE Abrams HL Leopard 2A6 HL Jagdpanther
|
|
|
|
|
Tankbear
|
Post subject: Re: 9XR Pro Programming Help Posted: Mon Nov 09, 2015 6:12 am |
|
Joined: Mon Feb 13, 2012 7:44 am Posts: 177 Location: UK
|
Hi guys,
Figured it out, guy on another forum sent me a eepe file to view and figured out I need to add a curve profile to the command lines.
Ian.
_________________ HL/Asiatam Metal Tiger 1 HL/Asiatam Metal KV-1 (1941) WSM T-34 SU100 HE Abrams HL Leopard 2A6 HL Jagdpanther
|
|
|
|
|
|
|
Page 1 of 1
|
[ 2 posts ] |
|
It is currently Sat May 25, 2024 11:30 pm All times are UTC + 10 hours
Users browsing this forum: No registered users and 1 guest |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|
|