Login    Forum    FAQ

Board index » Electronics » Radio Systems » Turnigy 9x




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: 9XR Pro Programming Help
 Post Posted: Sat Nov 07, 2015 8:34 pm 
Offline
King Tiger Commander
King Tiger Commander
User avatar

Joined: Mon Feb 13, 2012 7:44 am
Posts: 177
Location: UK
Hi Guys,

I've a 9XR Pro with standard firmware which I'm using for a RC excavator, but I'm a bit stuck on something.

At the moment I have a brushless ESC connected to channel 5 which is assigned a rotatory knob, channels 6, 7, 8 have servos attached to the hydraulic valve block to control the pistons. channels 6,7, 8 are programmed on the thumb sticks.

So currently I turn the knob about 1/4 turn to get about 25% throttle on the pump ESC then I can play around with the thumb sticks to get the pistons moving.

But I want to try this setup.

When ever I move thumb sticks (channels 6,7, 8) the pump automatically start at 25%

I tried adding mixing to channel 5 but it doesn't work for when I move a stick left or down only right or up plus it appears to take the sum of all 3 sticks so can get 75% in some stick configurations.

I'm sure I'm missing the obvious but any suggestions welcome.

Ian.

_________________
HL/Asiatam Metal Tiger 1
HL/Asiatam Metal KV-1 (1941)
WSM T-34
SU100
HE Abrams
HL Leopard 2A6
HL Jagdpanther


Top 
 Profile  
 
 Post subject: Re: 9XR Pro Programming Help
 Post Posted: Mon Nov 09, 2015 6:12 am 
Offline
King Tiger Commander
King Tiger Commander
User avatar

Joined: Mon Feb 13, 2012 7:44 am
Posts: 177
Location: UK
Hi guys,

Figured it out, guy on another forum sent me a eepe file to view and figured out I need to add a curve profile to the command lines.

Ian.

_________________
HL/Asiatam Metal Tiger 1
HL/Asiatam Metal KV-1 (1941)
WSM T-34
SU100
HE Abrams
HL Leopard 2A6
HL Jagdpanther


Top 
 Profile  
 
Display posts from previous:  Sort by  
 
Post new topic Reply to topic  [ 2 posts ] 

Board index » Electronics » Radio Systems » Turnigy 9x


Who is online

Users browsing this forum: No registered users and 2 guests

 
 

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: