I am using the XJT module in both my 9XRs with X8R RXs now Ian. Pricey, but bloody brilliant. The model matching is worth it alone
| RC Tanks Australia Forum http://www.rctanksaustralia.com/forum/ | |
| model matching http://www.rctanksaustralia.com/forum/viewtopic.php?f=117&t=1045 |
Page 1 of 2 |
| Author: | Tankbear [ Wed Nov 11, 2015 2:53 am ] |
| Post subject: | model matching |
Hi guys, Am back with more radio questions. This time model matching, I want it. I have 9XR Pro, flysky module and an orange module. With the flysky module I tried the changing protocol to PXX but no surprise the receiver didn’t respond. Not tried the orange module yet, but think this protocol is DSM (or something) and I don’t get the option to number the receiver like in PXX option so guessing this isn’t going work, or is it because I had the flysky module plugged in and not the orange? Anyway all confused with it all, so if anyone can help me set it up with the modules I have. Or if neither modules will do it it they could suggest what I need, will need to use 6 & 8 channel receivers. Cheers Ian. |
|
| Author: | Phyrephish [ Wed Nov 11, 2015 8:01 am ] |
| Post subject: | Re: model matching |
Hi TB You will only get Model matching with the FrSky XJT module and X series receivers. The PXX protocol is a FrSky one. Details of binding are in this post: viewtopic.php?f=154&t=882 The FlySky module is just a regular Turnigy module and the Orange module is a right royal pain in the butt. Sorry to be the bearer of bad news Cheers KG |
|
| Author: | Tankbear [ Wed Nov 11, 2015 9:02 am ] |
| Post subject: | Re: model matching |
Hi Kevin, I had a feeling that was goinf to be the case. Best I get saving for the XJT module and a load of receivers. Thanks for the info. Ian |
|
| Author: | Phyrephish [ Wed Nov 11, 2015 12:10 pm ] |
| Post subject: | Re: model matching |
You won't regret the purchase. Yes they are a bit expensive but well worth it. Cheers |
|
| Author: | scalawag [ Wed Nov 11, 2015 5:55 pm ] |
| Post subject: | Re: model matching |
I am using the XJT module in both my 9XRs with X8R RXs now Ian. Pricey, but bloody brilliant. The model matching is worth it alone
|
|
| Author: | Tankbear [ Wed Nov 11, 2015 10:35 pm ] |
| Post subject: | Re: model matching |
Hi Guys, More questions. Hobbyking is listing 2 versions of 8XR and X6R one labelled 2015 EU version which is cheaper. Is this older or newer version I should go for? My radio has ratchet on left stick. So do I need a Mode 1 Left stick gimbal to get the centering spring? I take is apart from changing the protocol to PXX there is nothing else to change as I've quite a big setup for my excavator and dont want to go through reprogramming it all again. Cheers Ian. |
|
| Author: | scalawag [ Wed Nov 11, 2015 11:17 pm ] |
| Post subject: | Re: model matching |
Hi Ian, I think either version of the RC will work with the XJT module. No other changes are needed, all you have to do is change the protocol the radio and Rx are using to pox. Everything ales stays the same. Kevin has a great video on this forum showing the binding process for thes modules/Rxs as it is a little different. Paul |
|
| Author: | Tankbear [ Wed Nov 11, 2015 11:24 pm ] |
| Post subject: | Re: model matching |
Hi Paul, Seen the video on binding. I just wanted to double check no changes to the radio programming. Do you know which gimbal I need to replace left stick ratchet? Ian. |
|
| Author: | scalawag [ Thu Nov 12, 2015 12:58 am ] |
| Post subject: | Re: model matching |
hi mate, Your radio is set up for mode 2 (throttle/ratchet on the left) so you need a mode 1 left stick. They are pretty much plug and play. once you are into the radio just 4 screws holding the gimble, and a couple of plugs. All nice and easy. Paul |
|
| Author: | Tankbear [ Thu Nov 12, 2015 1:45 am ] |
| Post subject: | Re: model matching |
Right order placed. XJT module X8R receiver x2 X6R receiver x2 Gimbel £118 with shipping. Guess I best get the FlySky & Orange modules and receivers sold. Ian. |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ | |