 |
 |
RC Tanks Australia ForumRemote Controlled Tanks Australia
|
|
It is currently Fri Apr 19, 2024 5:07 am
All times are UTC + 10 hours
| Author |
Message |
|
slowstartgjh
|
Post subject: Re: Custom firmware for the Turnigy 9x anyone?  Posted: Mon Oct 31, 2011 8:11 pm |
|
 |
| Panther Commander |
 |
Joined: Tue May 17, 2011 7:10 am
Posts: 69
|
|
My Eurgle is under tarp on your landing. Back from PNG in 7 days
Graham
_________________
Tamiya Leopard 2A6, Tiger 1 X 2, Sherman X 2, King Tiger X 3, Gepard
HL Tiger 1 X 3, ZTZ 99 MBT, KV1, Sturm III
HE LEOPARD, M1A2
Taigen Tiger 1, Panzer III
Torro T35/85.* WSM T35/85
Hooban Elefant
Mattarro Jagdtiger
HL 1/30 M4 & M26
VS King Tiger, Leo
|
|
  |
|
|
|
Phyrephish
|
Post subject: Re: Custom firmware for the Turnigy 9x anyone? Posted: Mon Oct 31, 2011 8:23 pm |
|
Joined: Tue May 10, 2011 1:17 pm
Posts: 1123
|
|
@ Slowstartgjh (Graham) sorry I missed you. Your Eurgle is now safely inside and awaiting flashing....
Note to everyone - GET A LiPo for your 9X so that that darn battery cover will actually fit...
@ Robert - I thought I sent you some eePe files, do you want them again? Also are you getting the ElMod Eco or Pro?
Cheers
_________________
rctanksaustralia.com
|
|
| |
|
|
|
Robert
|
Post subject: Re: Custom firmware for the Turnigy 9x anyone? Posted: Sun Nov 06, 2011 10:53 pm |
|
Joined: Thu Oct 13, 2011 4:51 am
Posts: 5
|
Hello Phyrephish, thank you for your mail, yesterday we tried all your settings with the ElMod Pro and the blaster pro. Works great. Now its an complete different Receiver with all the functions for our tanks. Great job, you are the best. All the best Robert from the german Forest Spessart. Historical proofed home of cinderella.  by the way.
|
|
| |
|
|
|
slowstartgjh
|
Post subject: Re: Custom firmware for the Turnigy 9x anyone? Posted: Tue Nov 22, 2011 7:13 pm |
|
|
| Panther Commander |
|
Joined: Tue May 17, 2011 7:10 am
Posts: 69
|
Many Thanks P-Fish for setting up my King on the Turnigy and I loved your Attack Vehicle. Cheers Slowstartgjh 
_________________
Tamiya Leopard 2A6, Tiger 1 X 2, Sherman X 2, King Tiger X 3, Gepard
HL Tiger 1 X 3, ZTZ 99 MBT, KV1, Sturm III
HE LEOPARD, M1A2
Taigen Tiger 1, Panzer III
Torro T35/85.* WSM T35/85
Hooban Elefant
Mattarro Jagdtiger
HL 1/30 M4 & M26
VS King Tiger, Leo
|
|
| |
|
|
|
SteveDoric
|
Post subject: Re: Custom firmware for the Turnigy 9x anyone? Posted: Fri Feb 17, 2012 4:14 pm |
|
Joined: Fri Feb 17, 2012 4:10 pm
Posts: 7
|
|
| |
|
|
|
Phyrephish
|
Post subject: Re: Custom firmware for the Turnigy 9x anyone? Posted: Fri Feb 17, 2012 8:41 pm |
|
Joined: Tue May 10, 2011 1:17 pm
Posts: 1123
|
|
Hi Steve
Welcome to the forum. Should of told me earlier you wanted tankER9X. If you are handy with a soldering iron you can get all the bits required from the shop or by contacting me.
It is not that hard a job to do yourself but if you are not confident RCTA will flash it for you and supply the USB programmer all for $30 plus postage to and from. All that is needed is the front half of the 9X. Unfortunately, this still weighs just over 500g so you are looking at another $15 for postage at least.
Cheers
Kevin G
_________________
rctanksaustralia.com
|
|
| |
|
|
|
SteveDoric
|
Post subject: Re: Custom firmware for the Turnigy 9x anyone? Posted: Fri Feb 17, 2012 9:11 pm |
|
Joined: Fri Feb 17, 2012 4:10 pm
Posts: 7
|
|
Hey Kevin,
I didn't know mate, oh well.
What parts do I need?
|
|
| |
|
|
|
Phyrephish
|
Post subject: Re: Custom firmware for the Turnigy 9x anyone? Posted: Sun Feb 19, 2012 11:29 pm |
|
Joined: Tue May 10, 2011 1:17 pm
Posts: 1123
|
|
Hi Steve
You need:
Soldering Iron (& solder)
6 x bits of wire
some shrink tube
either a 6 pin or 10 pin male IDC header
and the USB AVR programmer here
There are six spots (small solder pads) on the main PCB of the 9X where you will have to solder the 6 wires. Not all that hard but they are small spots so you will need a iron with a fine tip.
Here are the spots
Image4.jpg
The wires are then attached to your ISP header like so:
AtmelAvrIsp.png
This plan is as viewed from above with the pins coming out at you.
The rest is all software...
Cheers
You do not have the required permissions to view the files attached to this post.
_________________
rctanksaustralia.com
|
|
| |
|
|
|
haris123
|
Post subject: Re: Custom firmware for the Turnigy 9x anyone? Posted: Mon Apr 02, 2012 2:00 am |
|
Joined: Mon Apr 02, 2012 1:59 am
Posts: 1
|
|
| |
|
|
|
colin0070
|
Post subject: Re: Custom firmware for the Turnigy 9x anyone? Posted: Tue Oct 30, 2012 9:37 pm |
|
Joined: Tue Oct 30, 2012 9:25 pm
Posts: 3
Location: virgin island
|
|
it's a amazing technology
but to be honest it is not a great transmitter. I think we should really go with something more quality like a spectrum,futaba,hitec or jr. but in the end if your prepared to wait the 9x will do.
_________________
The engine barks before biting the electric motor bites without barking!
|
|
| |
|
|
|
It is currently Fri Apr 19, 2024 5:07 am
All times are UTC + 10 hours
Users browsing this forum: No registered users and 1 guest |
| |
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
|
