RC Tanks Australia Forum http://www.rctanksaustralia.com/forum/ | |
9x Switch Controlled Disabling of Pivot Turn http://www.rctanksaustralia.com/forum/viewtopic.php?f=117&t=446 |
Page 1 of 1 |
Author: | zak [ Sat Sep 22, 2012 1:15 pm ] |
Post subject: | 9x Switch Controlled Disabling of Pivot Turn |
If you have Tanker9x installed on your Turnigy 9x you can use the programming features to set up a switch to enable and disable pivot turning (ie super spins) at will. Step 1: Go to the mixer screen --> Enter CH1 RUD -->for the switch option select SW3 -->Exit Step 2: Go to Custom Switches Screen and set up as SW1 = l v l <ofs THR 35 SW2 = AND SW1 AIL SW3 = XOR AIL SW1 Step 3: Enjoy! When AIL is disengaged the tank is only able to turn by pivot turning, when engaged the tank is unable to pivot turn. Note, you can change AIL for any other switch (eg GEA, RUD) Thanks to Phyrefish for encouraging me to work this out. |
Author: | Phyrephish [ Sat Sep 22, 2012 3:23 pm ] |
Post subject: | Re: 9x Switch Controlled Disabling of Pivot Turn |
Great Job Zak. I hate super spin as much as the next guy. So much so that the now named 'ZAK Funcktion' will roll out on all future tankER9X equipped radios sold at RC Tanks Australia. As a thank you you are able to get any of the new RCTABU 'Black Label' boards gratis. Cheers Kevin G |
Author: | tisaksen [ Sat Sep 22, 2012 5:03 pm ] |
Post subject: | Re: 9x Switch Controlled Disabling of Pivot Turn |
Great work zak! I'm setting it up right away! Thank you |
Author: | zak [ Sun Sep 23, 2012 10:43 am ] |
Post subject: | Re: 9x Switch Controlled Disabling of Pivot Turn |
So I realised at work last night that SW2 isn't actually doing anything, so you can delete that one leaving SW1 = l v l <ofs THR 35 ------------------------ SW3 = XOR AIL SW1 |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |