RC Tanks Australia Forum http://www.rctanksaustralia.com/forum/ | |
Override RX18 turning? http://www.rctanksaustralia.com/forum/viewtopic.php?f=117&t=485 |
Page 1 of 1 |
Author: | tisaksen [ Thu Nov 08, 2012 7:11 am ] |
Post subject: | Override RX18 turning? |
Is it possible to use tankER9x to override how the tank turns? Right now its one belt forward and the other one backwards. I wish I could controll this and ideally the speed of each motor but I guess I'll need a separate ESC for each motor? |
Author: | Phyrephish [ Thu Nov 08, 2012 7:30 am ] |
Post subject: | Re: Override RX18 turning? |
I think that it should be possible (pretty sure actually) - see ZAK's post on how to disable superspin. Sorry I don't have the link but it is somewhere here on the forum Cheers Kevin G |
Author: | tisaksen [ Thu Nov 08, 2012 4:38 pm ] |
Post subject: | Re: Override RX18 turning? |
Oh right, I remember that one, I never got around to testing that setup. |
Author: | zak [ Thu Nov 08, 2012 5:54 pm ] |
Post subject: | Re: Override RX18 turning? |
I works ok; kills pivot turns but also kills proportional turns; ie it won't run one track at 100% and the other at 90%, it only turns by stopping the left or the right completely, or pivot with switch. |
Author: | tisaksen [ Thu Nov 08, 2012 6:32 pm ] |
Post subject: | Re: Override RX18 turning? |
My tank uses one track only when turning at low speed, the other track does not move at all, but what I want to get rid of is the fact that it will make one track go forward and the other backwards when I turn with a little more throttle.. I have no idea why it's doing that. I simply want to slow down one track when turning, not reverse it. |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |