Sir, yes, Sir!
Best wishes!
| RC Tanks Australia Forum http://www.rctanksaustralia.com/forum/ | |
| How to add 3 position switches to your 9XR Pro http://www.rctanksaustralia.com/forum/viewtopic.php?f=117&t=991 |
Page 1 of 5 |
| Author: | Phyrephish [ Wed Jun 03, 2015 6:07 pm ] |
| Post subject: | How to add 3 position switches to your 9XR Pro |
Hey All, Ok since the 9XR is no more it is time to move onto the Pro. The BEST thing about the Pro is the ability to replace a number of the 2 position switches with 3 position ones allowing for a greater range of function control. HOWEVER, for some unknown reason HK have not taken advantage of this and ship the radio without either the 3 position switches added NOR appropriate firmware. Fortunately it is not too hard a job the hardest thing is possibly getting the right sized switches. I have found a source for switches. RCTA is not doing this mod on the Pro for various reasons so if you get yourself a Pro here is a video series of how to add these switches. Cheers KG |
|
| Author: | Phyrephish [ Tue Jun 16, 2015 9:15 am ] |
| Post subject: | Re: How to add 3 position switches to your 9XR Pro |
Just an update to the above..... I have finally got round to updating tankER9XPro and the way ersky9x handles the switch assignment has changed. In HARDWARE you need to set. ELE switch ANA RUD switch ELE AIL switch DAC1 2015-06-16 09.03.54.jpg cheers kg |
|
| Author: | robtronic [ Thu Aug 13, 2015 11:46 pm ] |
| Post subject: | Re: How to add 3 position switches to your 9XR Pro |
Hi There , can you Tell me the size of This 3 way Switch which you use ?greets from germany .robert |
|
| Author: | robtronic [ Thu Aug 13, 2015 11:48 pm ] |
| Post subject: | Re: How to add 3 position switches to your 9XR Pro |
Hi There , which size Do these switches have? Greetz Rob |
|
| Author: | Phyrephish [ Sun Aug 16, 2015 5:54 pm ] |
| Post subject: | Re: How to add 3 position switches to your 9XR Pro |
The switches are 7.5 x 12 mm approximately. The extension for the lever is 5mm in diameter. I do not know if the thread is imperial or metric. Of course you can always open up your 9XR Pro and take measurements from the switches that are already in there since those are what you are replacing. Here is a link to an eBay supplier of suitable switches. [link] http://www.ebay.com/itm/1pc-SPDT-ON-OFF ... 0917206386[/link] Cheers |
|
| Author: | dudasis [ Wed Mar 09, 2016 11:58 pm ] |
| Post subject: | Re: How to add 3 position switches to your 9XR Pro |
Hi Kevin, It's possible do this modification on 9x Like this: http://www.hobbyking.com/hobbyking/stor ... ready-01(1).jpg Thx, Steve |
|
| Author: | Phyrephish [ Thu Mar 10, 2016 8:34 am ] |
| Post subject: | Re: How to add 3 position switches to your 9XR Pro |
No - only with a 9XR Pro board You should add a 9Xtreme board to the plain 9X - then you can add as many 3 position switches as you want. http://smartieparts.com/shop/index.php? ... cts_id=378 Cheers KG |
|
| Author: | dudasis [ Thu Mar 10, 2016 9:52 pm ] |
| Post subject: | Re: How to add 3 position switches to your 9XR Pro |
Sorry, I didn't mention. I've a modified 9x. I use er9x firmware, so possible? Cheers, Steve |
|
| Author: | Phyrephish [ Thu Mar 10, 2016 11:19 pm ] |
| Post subject: | Re: How to add 3 position switches to your 9XR Pro |
No - only with a 9XR Pro board You should add a 9Xtreme board to the plain 9X - then you can add as many 3 position switches as you want. http://smartieparts.com/shop/index.php? ... cts_id=378 Cheers KG |
|
| Author: | dudasis [ Thu Mar 10, 2016 11:34 pm ] |
| Post subject: | Re: How to add 3 position switches to your 9XR Pro |
Sir, yes, Sir! Best wishes!
|
|
| Page 1 of 5 | All times are UTC + 10 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ | |