Just getting it ready.
| RC Tanks Australia Forum http://www.rctanksaustralia.com/forum/ | |
| Mark-1 1/6 Challenger 2 http://www.rctanksaustralia.com/forum/viewtopic.php?f=124&t=218 |
Page 1 of 2 |
| Author: | PanzerIVman [ Sun Sep 11, 2011 8:40 pm ] |
| Post subject: | Mark-1 1/6 Challenger 2 |
Just getting it ready.
|
|
| Author: | PanzerIVman [ Sat Sep 24, 2011 9:42 am ] |
| Post subject: | Re: Mark-1 1/6 Challenger 2 |
I've been talking to Mark via email over the last few nights, and I've decided to copy the markings on the Mark-1 tank above. She'll come with the 360 degree fast turret and proportional smoke. The wait is just killing me!!!! (Due mid Dec.) |
|
| Author: | PanzerIVman [ Thu Nov 03, 2011 4:32 pm ] |
| Post subject: | Re: Mark-1 1/6 Challenger 2 |
She comes next month!!!!!!!!!!!!!!!!!!!!! |
|
| Author: | Tracks [ Thu Nov 03, 2011 5:44 pm ] |
| Post subject: | Re: Mark-1 1/6 Challenger 2 |
Hmmmm, tank 
|
|
| Author: | TANKBOY [ Thu Nov 03, 2011 6:12 pm ] |
| Post subject: | Re: Mark-1 1/6 Challenger 2 |
Does the gun recoil ? |
|
| Author: | PanzerIVman [ Thu Nov 03, 2011 6:40 pm ] |
| Post subject: | Re: Mark-1 1/6 Challenger 2 |
I've left that for me to do. |
|
| Author: | Tracks [ Fri Nov 04, 2011 6:07 am ] |
| Post subject: | Re: Mark-1 1/6 Challenger 2 |
I've talked with monotheist about understanding how he made your KT's gun recoil. I have the electronic side of it worked out, just need to liaise with monotheist re cutting up the internal gun mounting bracket and fitting the servo. |
|
| Author: | 2/14 QMI [ Fri Nov 04, 2011 10:27 am ] |
| Post subject: | Re: Mark-1 1/6 Challenger 2 |
Hey Tracks, When you work it out can you let me know how, Please, please, please, as have to do the same with my 1/9th Abrams. Thanks, Peter |
|
| Author: | PanzerIVman [ Fri Nov 04, 2011 1:00 pm ] |
| Post subject: | Re: Mark-1 1/6 Challenger 2 |
I can post some pics this end if ya like. |
|
| Author: | Tracks [ Sat Nov 05, 2011 5:30 am ] |
| Post subject: | Re: Mark-1 1/6 Challenger 2 |
Will see what I can do 2/14 QMI I have the Model Solutions of Canada SF Sound Card (As does P4Man's KT). I will be attempting to drive the recoil servo from a different part of the sound module (as opposed to P's KT). Depending on the sound module/DMD, etc you have in your Abrams will determine how you can control a servo. You will also have to make a physical modification to allow the barrel to recoil - I still have to work that out (with a little help from Monotheist). Will keep you updated. |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ | |