| RC Tanks Australia Forum http://www.rctanksaustralia.com/forum/ | |
| MAKO - Stand Alone Repair Station Function http://www.rctanksaustralia.com/forum/viewtopic.php?f=147&t=454 |
Page 1 of 1 |
| Author: | Phyrephish [ Fri Oct 05, 2012 2:46 pm ] |
| Post subject: | MAKO - Stand Alone Repair Station Function |
HI ALL The MAKO V3 has had yet another string added t it's bow. A MAKO can now function as a stand alone repair station. So if there is nobody with a Bergepanzer or there is nobody to operate a mobile Bergepanzer you can simply fit a MAKO to any tank (operational or not). You could even fit the MAKO into a box for that matter. On startup during the program period press '7' on the remote and the MAKO will function as an automatic Bergepanzer. During battle if you want to repair your tank simply drive up to the repair station and fire at it. The repair station will then fire back the repair signal and your tank will go into repair mode. The video below gives an example of operation. I have set up a MAKO in the Sturmtiger and it has been set to Automatic Bergepanzer mode (7). When the Bulldog fires at the Sturmtiger the Sturmtiger responds by sending out the repair signal. The Bulldog then undergoes a single repair process - extending the number of lives by one. In practice it would be better to have a repair earlier in the battle. The video is just to show the system in action.....Enjoy... Cheers |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ | |