| RC Tanks Australia Forum http://www.rctanksaustralia.com/forum/ | |
| Mako 2- Muzzle flash query http://www.rctanksaustralia.com/forum/viewtopic.php?f=147&t=668 |
Page 1 of 1 |
| Author: | scoopey [ Tue Jun 04, 2013 7:06 pm ] |
| Post subject: | Mako 2- Muzzle flash query |
Originally with Heng Long electrics and TX you had to use a diode to force a trigger for the flash and IR to work. With the RC2HL installed and operating via switch on the Turnigy 9x does this "trigger" diode need to be used? |
|
| Author: | Tankbear [ Wed Jun 05, 2013 1:54 am ] |
| Post subject: | Re: Mako 2- Muzzle flash query |
No you don’t need the diode mod. When you push up with the left thumb stick that has same action as pushing the K button on the HL controller transmitter, so fires IR, activates the flash, get the sound and track recoil (if no ATRC fitted) Ian. |
|
| Author: | scoopey [ Wed Jun 05, 2013 6:41 am ] |
| Post subject: | Re: Mako 2- Muzzle flash query |
Thanks, that will simplify the wiring! |
|
| Author: | scoopey [ Wed Jun 05, 2013 8:16 pm ] |
| Post subject: | Re: Mako 2- Muzzle flash query |
I gather this means when using a servo recoil with an RC2HL and Mako the 2 pin (from the 5 + 2) trigger does not do anything |
|
| Author: | Tankbear [ Wed Jun 05, 2013 10:01 pm ] |
| Post subject: | Re: Mako 2- Muzzle flash query |
Yes the 2 pin isn't required its not even installed on my tank. Ian |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ | |