RC Tanks Australia Forum

ok I think my Mako is fine but.... when battling with tamiya tanks /h/l tanks I take 5 hits and the the lights flash like mad showing the kill shot but tank just keeps going, fireing full movement etc another 5 hit and it does the same, and will go on forever..... any help on this please

I have had a lot of help from michealc on rctw. but have now come to a dead end

I'm not sure exactly what exactly is happening but when you say the 'lights flash madly' that could mean that you have taken a coup de gras hit and been knocked out. Are you aware of the 'Coup de gras' function??? When you are hit with a Coup de gras shot the LEDs will flash rapidly. The tank should be immobilised if you have an ATRC connected

The 'randomness' of the coup de gras hit can not be so random with the MAKO. Coup de gras levels the playing field if you are using the Tamiya 2 shot kill IR signal.

If you want to disable coup de gras then you need to program the MAKO using a SONY TV remote. At startup during the program period you simply press the CH- (P-) button on the remote.

cheers

_________________

rctanksaustralia.com

the trouble is the tank does NOT get disabled at all even after continuos hits. atrc is fitted.

am really getting frustrated with this now. have completely changed out rx-18 board and leads, in case that was the issue ,made no difference. it is fireing and hit tamiya and wsn tanks and knocking them out but they cant knock me out ???????????