RC Tanks Australia Forum

I have successfully set up my tank using an orange receiver and a spectrum dx8 transmitter. If I bind the orange receiver to my Turnigy transmitter I cannot seem to get the thing to start... help!

All channels seem to work servo's the same as the spectrum does.

HI Vorstertp and everyone else

If wanting help for setups please provide all the details of your setup. Most importantly we need to know exactly what model of receiver especially in the case of OrangeRX. Pics are always a quick and easy means of providing info (picture paints 1000 words)

For example we need to know

What model Orange receiver?
Do you have any other Orange receivers bound to the Turnigy
What model Turnigy Radio 9X or 9XR?
What firmware are you running factory firmware or tankER9X (ER9X)?
What OrangeRX module is installed in your 9X?

Here at RCTA we do all of our testing using the Turnigy 9XR, OrangeRX module and as many of the OrangeRX receivers we can get our hands on. All of the OrangeX receivers work fine.

BUT VERY IMORTANTLY we have found that you can not mix and match receiver models without issues. This is clearly a Turnigy OrangeRX thing. Maybe we have something wrong here but we have consistently found that you can not have a R610 receiver in/for Model One and a different model like a R910 for Model 2. All your models must use the same receiver all R610s or all R910s.

Cheers
Kevin G