Hi All
This is how I set up my El Mod ECO receiver with the Turnigy TX
pic of the El mod ECO instructions using the 6 channel mode
this would be the way from the manual
pic of how I ended up setting the receiver up not as per instructions
cheers
Gra
| RC Tanks Australia Forum http://www.rctanksaustralia.com/forum/ | |
| EL Mod ECO & Turnigy TX setup http://www.rctanksaustralia.com/forum/viewtopic.php?f=153&t=217 |
Page 1 of 1 |
| Author: | Gra [ Thu Sep 08, 2011 2:38 pm ] |
| Post subject: | EL Mod ECO & Turnigy TX setup |
Hi All This is how I set up my El Mod ECO receiver with the Turnigy TX pic of the El mod ECO instructions using the 6 channel mode this would be the way from the manual pic of how I ended up setting the receiver up not as per instructions cheers Gra
|
|
| Author: | Phyrephish [ Thu Sep 08, 2011 3:58 pm ] |
| Post subject: | Re: EL Mod ECO & Turnigy TX setup |
Thanks for the posting Gra. You have saved me from re-inventing the wheel so to speak. The correct way to wire up is exactly in Gra's last photo CH1-Orange CH2-Yellow CH3-Brown CH4-Green CH5-Blue Ch6-Purple Thanks again |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ | |