| RC Tanks Australia Forum http://www.rctanksaustralia.com/forum/ | |
| IMPORTANT REMORA UPDATE http://www.rctanksaustralia.com/forum/viewtopic.php?f=156&t=871 |
Page 1 of 1 |
| Author: | Phyrephish [ Wed Jun 25, 2014 1:30 pm ] |
| Post subject: | IMPORTANT REMORA UPDATE |
Hi All A bug has been found in the code running on the very latest series of REMORA. These are the boards with the connection for a LiPo and a piezo buzzer on the back for warnings. The bug stops REMORA from getting the correct change of channel from the MANTA. If you want to change channels on Remora you can either post REMORA back to RCTA for a free update or do the update yourself if you have a RCTA program cable. DIY is fairly simple - download this utility first Reassign COMNo Utility.rar Extract the file to a handy location and plug in your RCTA programming cable Start the utility which will tell you what Com Port the cable is on. If it is on either 5 or 9 great. Note the number and shut the utility down. If not on 5 or 9 use the utility to change to either Com 5 or Com 9. Shut down utility. Depending on what Com port download: COM5 RemoraUpdateC5.zip COM9 RemoraUpdateC9.zip Unzip the file. Make sure that your cable is connected and on the correct Com Port. Connect to REMORA with the white cable to the pad marked 'S'. Power REMORA using either the 5V+ wire or via a powered up MAKO. Run the RemoraUpdate program and that should be it. Cheers Kevin G |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ | |