| RC Tanks Australia Forum http://www.rctanksaustralia.com/forum/ | |
| Sirvoe - Automatic Machine gun Mode http://www.rctanksaustralia.com/forum/viewtopic.php?f=158&t=1147 |
Page 1 of 1 |
| Author: | Phyrephish [ Wed Jun 01, 2016 4:46 pm ] |
| Post subject: | Sirvoe - Automatic Machine gun Mode |
Below is a short video of Sirvoe operating in Automatic Machine gun Mode. In this mode sirvoe will automatically move a servo connected to your hull machine gun. Sirvoe runs through a series of movements which it repeats till it is powered off. NOTE: Sirvoe ONLY moves the machine gun it DOES NOT fire. In the video below I am controlling when the gun is fired. With automatic control the machine gun is set and forget. An additional receiver channel is not required for operation (movement). If using Asp one can plug Sirvoe into the sirvoe port or even the Remora port on the Juno sound board. All Sirvoe needs for this mode is a 5V supply. 2016-06-01 14.25.25.jpg Cheers KG |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ | |