RC Tanks Australia Forum http://www.rctanksaustralia.com/forum/ | |
Asp1 Updates to Asp2 functionality http://www.rctanksaustralia.com/forum/viewtopic.php?f=164&t=1163 |
Page 1 of 1 |
Author: | Phyrephish [ Fri Aug 05, 2016 10:02 am ] |
Post subject: | Asp1 Updates to Asp2 functionality |
Hey All Finally here are the update files for Asp1 to give it almost all of the functionality of Asp2 ASP1_1608_updates.zip Try getting free files to update your IBU2 to IBU3 functionality or a TK board to the next level up But you bought an Asp - you were pretty smart. There are read me files in the update so please read them. The update assumes that you have moved the elevation motor off of the 8-pin connector and onto it's dedicated port OR you are using a servo for elevation. It also assumes that you are not using a REMORA (I don't think anyone is) as the is now a recoil servo signal on the old Remora port - NO NEED for a Sirvoe board. You can plug a servo direct into the old Remora port on the underside of Juno. DKLM gearbox support also available and is selected in test mode - use a toothpick to toggle the IR/Airsoft mode switch. Sorry but that was the best solution I could come up with. Best to access test mode using your RADIO as test mode now has voice support and you need your Juno board attached. Cheers Kevin G |
Author: | dudasis [ Sat Aug 06, 2016 5:55 pm ] |
Post subject: | Re: Asp1 Updates to Asp2 functionality |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |