| RC Tanks Australia Forum http://www.rctanksaustralia.com/forum/ | |
| Asp2 - Flakpanzer Mode http://www.rctanksaustralia.com/forum/viewtopic.php?f=164&t=1174 |
Page 1 of 1 |
| Author: | Phyrephish [ Sun Sep 04, 2016 5:09 pm ] |
| Post subject: | Asp2 - Flakpanzer Mode |
| Author: | Afrikakorps [ Thu Feb 16, 2017 7:11 pm ] |
| Post subject: | Re: Asp2 - Flakpanzer Mode |
Hi Kevin, this is excellent  I have built a wirbelwind quad flak and will definitely be putting an ASP into it after seeing this. Do i need to use ASP2 or can i use the original series ASP ? Because the quad flak had such a high rate of fire, is it possible to increase the flakrounds =8 to =20 and to change the other settings accoringly ? Thanks Steve |
|
| Author: | Phyrephish [ Thu Feb 16, 2017 8:48 pm ] |
| Post subject: | Re: Asp2 - Flakpanzer Mode |
HI Steve Asp 1 or Asp2 should be fine. The recoil is being done by a sirvoe board. You can change the settings as per the instructions on the file. So yes you can go to 20 as it is still an even number. BUT remember it is still for IR battle so the flak should operate with short bursts - not machine gun like. However, I suspect that you will have more of a technical challenge with the servos than with Sirvoe. Cheers KG |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ | |