| RC Tanks Australia Forum http://www.rctanksaustralia.com/forum/ | |
| Asp - Servo Support http://www.rctanksaustralia.com/forum/viewtopic.php?f=164&t=978 |
Page 1 of 1 |
| Author: | Phyrephish [ Thu May 14, 2015 12:12 pm ] |
| Post subject: | Asp - Servo Support |
Asp itself does not provide for direct connection of servos to the main board. However, when combined with a radio running any of the firmwares from the er9X or Open TX series precise control for multiple servos can be obtained. With a standard 8 channel setup Asp provides support for a Recoil servo plus an elevation or traverse servo on CH8. Further servos can be used with systems that offer more than 8 channels (FrSky). The video below shows: Recoil Servo - Using a sirvoe board (part of the IR ASP package) Elevation Servo - on CH8 plus addition Pan and Tilt control servos for a camera with a 16 channel system Pan Servo - CH9 Tilt Servo - CH10 Cheers KG |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ | |