RC Tanks Australia Forum http://www.rctanksaustralia.com/forum/ | |
Panzer III - Help appreciated http://www.rctanksaustralia.com/forum/viewtopic.php?f=5&t=267 |
Page 1 of 1 |
Author: | Joshua [ Sun Dec 25, 2011 12:17 pm ] |
Post subject: | Panzer III - Help appreciated |
Hello all, First post on this site, and I'm really looking forward to getting further into the hobby. I was hoping some of you might be able to help me out.. I have just received a Heng Long S&S Panzer III as a gift. I used it for perhaps 20-25minutes (tops). After this time, the tank all of a sudden began to turn right. It seems that the only tracks running are on the left hand side. I'm thinking it is a problem with the right hand motor, although having never used one of these tanks before I'm not sure. Everything else seems to be working just fine. Any tips on what I should do? Thanks for reading, Joshua |
Author: | kamaz [ Mon Dec 26, 2011 1:15 pm ] |
Post subject: | Re: Panzer III - Help appreciated |
Welcome to forum! First you need to check if your L/R trimming knob is in center position. If it is, then you`ll have to open your tank. It could be some simple problem like connector just got unplugged. For this you`ll need Phillips head screwdriver. This is mother board that is inside: heng-long-multi-function-unit-rx18-with-leads-[2]-519-p.jpg See CN7 connector, that is one that should be unplugged. |
Author: | Joshua [ Mon Dec 26, 2011 3:26 pm ] |
Post subject: | Re: Panzer III - Help appreciated |
Hi Kamaz! Thanks for taking the time to help me out Before you replied I decided to open her up and get my feet wet.. The issue was exactly as you described and I simply reconnected a loose plug.. Again, many thanks for the help! Josh |
Author: | kamaz [ Tue Dec 27, 2011 12:21 pm ] |
Post subject: | Re: Panzer III - Help appreciated |
Glad to be of some assistance! Cheers! And good luck! |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |