RC Tanks Australia Forum

Hi guys,
i 've just finished to assemble my first tamiya panzer tiger early production. i bought i flysky T6 radio and receivs. Following tamiya instructions i have set all panzer tiger functions. Movement of the panzer is ok, turret rotation and movement up and down of the main gun as well. the problem is that i am not able to use the fire and recoil of the main gun and the fire of the machine gun. I think is a problem of radio control settings because i did a chek of all the components with the elettronic control unit of the panzer and everyting seems to be ok.
Could you help me?

thanks

Spipes

Hi Spipes

There is no Tank support firmware for the T6. There is however a lot of support for the 9X radio series or Taranis. The best we can do is offer a general bit of advice as we have no access to a T6. Read the manual and then assign if you can a switch to operate the cannon and machine guns at +120% and -120% respectively. Conversely, set your limits on the CH3 stick to 80% and recalibrate your MFU. Then assign those switches to +100% and -100%.

Cheers
KG

_________________

rctanksaustralia.com