| RC Tanks Australia Forum http://www.rctanksaustralia.com/forum/ | |
| rc settings for panzer tiger early production http://www.rctanksaustralia.com/forum/viewtopic.php?f=69&t=1036 |
Page 1 of 1 |
| Author: | Spipes [ Thu Oct 22, 2015 1:32 am ] |
| Post subject: | rc settings for panzer tiger early production |
Hi guys, i 've just finished to assemble my first tamiya panzer tiger early production. i bought i flysky T6 radio and receivs. Following tamiya instructions i have set all panzer tiger functions. Movement of the panzer is ok, turret rotation and movement up and down of the main gun as well. the problem is that i am not able to use the fire and recoil of the main gun and the fire of the machine gun. I think is a problem of radio control settings because i did a chek of all the components with the elettronic control unit of the panzer and everyting seems to be ok. Could you help me? thanks Spipes |
|
| Author: | Phyrephish [ Thu Oct 22, 2015 8:17 am ] |
| Post subject: | Re: rc settings for panzer tiger early production |
Hi Spipes There is no Tank support firmware for the T6. There is however a lot of support for the 9X radio series or Taranis. The best we can do is offer a general bit of advice as we have no access to a T6. Read the manual and then assign if you can a switch to operate the cannon and machine guns at +120% and -120% respectively. Conversely, set your limits on the CH3 stick to 80% and recalibrate your MFU. Then assign those switches to +100% and -100%. Cheers KG |
|
| Author: | Spipes [ Thu Oct 22, 2015 9:06 pm ] |
| Post subject: | Re: rc settings for panzer tiger early production |
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ | |