 |
 |
RC Tanks Australia ForumRemote Controlled Tanks Australia
|
|
It is currently Fri Apr 19, 2024 11:12 pm
All times are UTC + 10 hours
 
|
Page 1 of 1
|
[ 3 posts ] |
|
| Author |
Message |
|
scoopey
|
Post subject: RX18 "sound triggers"  Posted: Mon Jun 10, 2013 7:12 pm |
|
Joined: Mon Jun 03, 2013 9:35 pm
Posts: 10
|
|
I know if this was to work it would require some soldering but does the RX18 have a logic feed to trigger the sounds.
By this I mean if say I send a logic one to a connection I can trigger the elevation/rotation sound without turning the turret.
It seems an odd question but I fancy converting the Heng Long Tiger to servo elevation. Whilst I've seen this done, in all cases the elevation occurs without any matching sounds.
|
|
  |
|
|
|
Tankbear
|
Post subject: Re: RX18 "sound triggers" Posted: Mon Jun 10, 2013 7:22 pm |
|
Joined: Mon Feb 13, 2012 7:44 am
Posts: 177
Location: UK
|
|
I would say use a servo lead y cable so the rc2hl is sending signals to the rx18 so your getting the sounds then connect a servo to the y cable to control the elevation.
Not certain if that will give full range of movement of the servo though.
Ian
_________________
HL/Asiatam Metal Tiger 1
HL/Asiatam Metal KV-1 (1941)
WSM T-34
SU100
HE Abrams
HL Leopard 2A6
HL Jagdpanther
|
|
| |
|
|
|
scoopey
|
Post subject: Re: RX18 "sound triggers" Posted: Tue Jun 11, 2013 9:00 am |
|
Joined: Mon Jun 03, 2013 9:35 pm
Posts: 10
|
|
There is of course one snag with a Y split and that is once you take your hand off the stick it will return to centre and thus reset the elevation servo.
|
|
| |
|
|
|
|
|
Page 1 of 1
|
[ 3 posts ] |
|
It is currently Fri Apr 19, 2024 11:12 pm
All times are UTC + 10 hours
Users browsing this forum: No registered users and 1 guest |
| |
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
|
