Hallo
| RC Tanks Australia Forum http://www.rctanksaustralia.com/forum/ | |
| Another one from the Netherlands http://www.rctanksaustralia.com/forum/viewtopic.php?f=83&t=595 |
Page 1 of 1 |
| Author: | Code501 [ Thu Mar 14, 2013 5:36 am ] |
| Post subject: | Another one from the Netherlands |
Hello there, I was looking for stuff for my (soon to arrive) Turnigy 9XR. Then I found this site. The Tanker9x firmware appealed to me and I want to flash it to my 9XR. I own a Asiatam Tiger I Späte ausführung with a Benedini sound card and a (soon to be replaced) Elmod Pro. I am also looking for a way to let the speaker output of the Benedini go through a Clark TK-22 board to minimize the amount of speakers needed. (I need two speakers now, 1 for Benedini and 1 for Clark) Maybe there is someone that can help me? |
|
| Author: | Phyrephish [ Thu Mar 14, 2013 7:35 am ] |
| Post subject: | Re: Another one from the Netherlands |
HI Code501 Here is tankER9X (latest version) tanker9x_130101.zip You will need eePe or other 9X editor to flash to the 9XR. If you want to make both levers self-centering then there is a video on how to do this on on our YouTube channel http://www.youtube.com/user/rctanksau Sorry can't help with your speaker situation as I do not know if either board uses PWM to drive the speaker or not. Cheers Kevin G |
|
| Author: | Paulus [ Thu Mar 14, 2013 8:13 am ] |
| Post subject: | Re: Another one from the Netherlands |
Hallo
|
|
| Author: | Code501 [ Thu Mar 14, 2013 7:25 pm ] |
| Post subject: | Re: Another one from the Netherlands |
@Paulus: Hallo daar. @Phyrephish: Is it possible to use a gyro with the Tanker9x firmware? It is for something like this: |
|
| Author: | Phyrephish [ Thu Mar 14, 2013 8:34 pm ] |
| Post subject: | Re: Another one from the Netherlands |
Yes of course - because the the two do not interact at all. For the most part the gyro will work inside your tank automatically. cheers kg |
|
| Author: | Code501 [ Thu Mar 14, 2013 8:44 pm ] |
| Post subject: | Re: Another one from the Netherlands |
And can you still set the sensitivity of the gyro? It uses a spare channel to do that. |
|
| Author: | Code501 [ Tue Mar 26, 2013 4:21 am ] |
| Post subject: | Re: Another one from the Netherlands |
Got a fix for the speaker issue. See diagram below: It is now possible to have only one speaker onboard. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ | |