|
|
RC Tanks Australia ForumRemote Controlled Tanks Australia
|
|
It is currently Tue Nov 12, 2024 1:25 am All times are UTC + 10 hours
Author |
Message |
scalawag
|
Post subject: Re: H/L M1A2 Abrams Posted: Sun Nov 15, 2015 5:37 pm |
|
Joined: Mon Mar 17, 2014 4:48 pm Posts: 147 Location: Eastbourne UK
|
A quick update. I have now fitted JP power 480 motors, and I am awaiting a 3s LiPo to go in this tank. The motors already have given it a little performance boost and the 3s LiPo should finish the job. I have a IBU2 Pro in this tank which can use the extra voltage from a 3s LiPo, I would check if you are using anything different that it can run at the higher voltage before following my lead, I don't want you to fry your control system. I believe the ASP is ok up to 12v so should work ok. Perhaps you could confirm this Kevin
|
|
|
|
|
Tankbear
|
Post subject: Re: H/L M1A2 Abrams Posted: Sun Nov 15, 2015 8:51 pm |
|
Joined: Mon Feb 13, 2012 7:44 am Posts: 177 Location: UK
|
Hi Paul,
Using 3S LiPo in modern tanks is great it gives a faster more realistic speed, I use it in all my cold war to modern tanks.
Ian.
_________________ HL/Asiatam Metal Tiger 1 HL/Asiatam Metal KV-1 (1941) WSM T-34 SU100 HE Abrams HL Leopard 2A6 HL Jagdpanther
|
|
|
|
|
scalawag
|
Post subject: Re: H/L M1A2 Abrams Posted: Sun Nov 15, 2015 9:14 pm |
|
Joined: Mon Mar 17, 2014 4:48 pm Posts: 147 Location: Eastbourne UK
|
|
|
|
|
scalawag
|
Post subject: Re: H/L M1A2 Abrams Posted: Wed Nov 18, 2015 5:59 pm |
|
Joined: Mon Mar 17, 2014 4:48 pm Posts: 147 Location: Eastbourne UK
|
Now using a 3s liPo in the Abrams. Better performance all round. If your control system can handle it I would definitely recommend this for modern armour.
|
|
|
|
|
TrudyAgee
|
Post subject: Re: H/L M1A2 Abrams Posted: Tue Jan 19, 2016 4:44 am |
|
Joined: Tue Jan 19, 2016 4:21 am Posts: 1
|
@Kevin you should go for the fitted JP power 480 motors, and 3s LiPo. The motors will give a little performance boost and the 3s LiPo should finish the job. Use the IBU2 Pro in this tank which can use the extra voltage from a 3s LiPo. I believe the ASP is ok up to 12v so should work ok. Perhaps you could confirm this Kevin
|
|
|
|
|
Phyrephish
|
Post subject: Re: H/L M1A2 Abrams Posted: Wed Jan 20, 2016 12:48 pm |
|
Joined: Tue May 10, 2011 1:17 pm Posts: 1123
|
Yes Asp is fine with 3 cell LiPos. It has always been a standard recommendation of mine to use 3 cell LiPos and the Asp in modern tanks. There are high speed gearboxes available from rctank.de. I prefer to use an entire matched motor gearbox setup rather than putting a quality motor on a not so quality gearbox.
Even better performance if you can sneak a cooling fan in there as well
Cheers KG
_________________ rctanksaustralia.com
|
|
|
|
|
|
It is currently Tue Nov 12, 2024 1:25 am All times are UTC + 10 hours
Users browsing this forum: No registered users and 0 guests |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|
|